DensiTronic Professional

DensiTronic Professional is an automatic colour measuring system. Its motorised measuring head is able to scan control strips at any position on the printed sheet. The position of the control strip in the direction of print is set as a motor parameter.

Function

After scanning of the control strip, the measured solid densities, Lab values, PSO evaluations and PDF reports are presented on the screen. The measurements can then be confirmed as a basis for single or dynamic corrections of the ink key settings.

Use

After setting up the measuring system, including calibration for the substrate white, the printer takes a sheet from the press delivery and places it on the separate measuring desk for measurement. Subsequently, the proposed corrections can be accepted and transmitted to the press for automatic modification of the ink profile.

Availability

DensiTronic Professional

RA105

RA106

RA145

RA164

RA185

RA205

Technical Data

Density

0...2,5, Lab, colour spectrum

Optimum control strip height / min. height1)

6 mm / 5 mm

Measurement cycle / makeready2)

120 / 240 sheets

Measuring time (density)

10 s / m

1) Process prerequisites
2) Reference job "KBA_Ger_Color"